Our Blog

The purpose of braces and other forms of orthodontic treatment at OrthoCare Orthodontics is to correct malocclusion, also known as crooked or crowded teeth, or “bad bites.” Past orthodontic practice dictated that wisdom teeth be removed, especially in cases of crowding.

The wisdom teeth are the last teeth to come in, and are officially known as the third molars. The teeth typically erupt, or break the surface of the skin, in young people between the ages of 13 and 20.

Sometimes, wisdom teeth are impacted. That means they cannot break through the gum tissue. This typically happens when the mouth or jaw is too small to accommodate the teeth. Impacted wisdom teeth can become infected, and some dentists and orthodontists may want to remove them as prophylaxis to prevent possible future infection.

Justification for removing wisdom teeth

Cooper, Ford S. will tell you that in some cases, wisdom teeth attempt to come in the wrong way, either tilting in the jaw, or sideways. If the mouth is too small to accommodate these additional teeth, they inevitably become impacted. Swelling or infection of the gum flap above an impacted wisdom tooth may cause pain. The greatest danger is pericoronitis, a potentially dangerous infection that can occur in the gum area around an impacted wisdom tooth, or around a wisdom tooth that has erupted.

Orthodontists base their decision to remove wisdom teeth on each patient's individual circumstances. To learn more about the impact wisdom teeth have on orthodontic treatment, or to schedule a visit with Cooper, Ford S., please give us a call at our convenient Charlotte, NC or Spartanburg, SC office!

Even though it’s called a “permanent retainer,” your fixed retainer isn’t necessarily meant to last a lifetime. But with care, it should last just as long as you need it, keeping your teeth perfectly aligned after your orthodontic treatment is complete. Why is this retainer the one to choose for challenging alignments?

A fixed retainer is often used for teeth which were very crowded or had large gaps before treatment, especially along the bottom teeth, which tend to shift more. With a permanent retainer, a custom fitted wire is attached with a bonding adhesive to the back of each of the selected teeth. This design makes sure that the teeth can’t shift out of place while your bones and ligaments strengthen around them.

Occasionally, though, your permanent retainer isn’t quite as permanent as it should be. If you think your fixed retainer is becoming “unfixed,” what clues should you look for?

• Broken wire

A clearly broken wire can be obvious, or you might discover it when you notice pain or irritation caused by the end of a wire poking around your tongue or mouth.

• Loose bond

The orthodontic adhesive used to bond the wire to each tooth can come loose as the result of an accident, an unfortunately chewy treat, or simply with the passage of time.

• Shifting teeth

You might not notice anything wrong with your retainer, but what you do notice is that your once-straight teeth have started shifting back to their old positions. If you see any movement in your teeth, your retainer might need repair.

What should you do?

• Give our Charlotte, NC or Spartanburg, SC orthodontic office a call! It’s important to act promptly to prevent further retainer damage, oral discomfort, and tooth misalignment.
• Rinse with warm water if your mouth is irritated.
• If a wire is poking you, call us for advice on gently pushing it back into place.
• Orthodontic wax can protect your teeth and tissue from detached wires.
• If you have a clear retainer, wear it until you can come in. If you don’t have one, and you can’t see us immediately, ask if an over the counter moldable retainer is a good idea to help keep your teeth aligned in the meantime.

One benefit of a fixed retainer is that it’s almost invisible because it’s behind your teeth. But this hidden location can also make it difficult to notice potential problems. Fortunately, there are some proactive steps you can take to help your permanent retainer—and your bite—stay healthy:

• Avoid foods which are sticky, hard, or chewy. If a food can damage traditional braces, it can damage your retainer.
• Wear protective gear like mouthguards and helmets when you’re active—they protect more than just your retainer!
• Ask your dentist to examine your retainer adhesive’s staying power whenever you have a checkup.

If you notice a detached wire or loose adhesive or see your teeth shifting, give Cooper, Ford S. a call. It’s important to act promptly to fix a fixed retainer, because your teeth and bite alignment are in jeopardy when you delay. And always bring your retainer (or retainer pieces) with you in case we can repair it.

Permanent retainers don’t necessarily last forever. But whether your fixed retainer is going to be with you long-term, or whether you’re going to transition to a removable retainer in the future, let’s make sure your permanent retainer is just as “permanent” as it needs to be!

When we think braces, we can’t help but think of the brackets on each tooth and the colorful ligature bands that surround them. But actually, the whole point of those brackets and bands is to hold the archwire in place as it gradually moves your teeth to create a better bite and a straighter smile. Let’s learn more about this talented part of your braces!

• Wire We Wearing These, Anyway?

Archwires use gentle, continuous pressure to move your teeth into alignment. That sounds simple, but there is actually a lot going on. Teeth often need more than realigning. Some teeth need to be turned a bit, some tilted. Your teeth need to be better aligned with those next to them, of course, but also need to fit properly with the teeth above or below them. You might have a malocclusion, or bad bite.

How can one wire handle all that? Well, it can’t. That’s why there are different types of wire. We often use thinner, flexible wires at the beginning of treatment, to put gentle pressure on the teeth as they start their movement. Other wires are firmer, and can be helpful in later phases, when each tooth is carefully moved to its specific, ideal spot. Archwires can be round or rectangular, thicker or thinner, springy or stiff, remember their shape or be bendable—all depending on what they need to do.

Whew! This sounds confusing, but Cooper, Ford S. and our team are archwire experts! At every adjustment appointment, we check on the progress of your alignment and choose the exact wire you need to take you to the next stage of your orthodontic journey.

• Out of the Frying Pan, Into the Wire

Now that you have braces, it’s more challenging to make sure that your teeth are clean after eating. We’ll give you advice on how to get rid of the pesky food particles that sometimes get stuck in your braces. First, that’s absolutely not the look you’re going for. But, more than that, bacteria can use these “leftovers” as fuel to create the acids that damage your enamel and cause cavities.

There’s a whole new world of dental products out there waiting to help get your braces clean. Special toothbrush heads work in the spaces between your teeth and the archwire. There are floss threaders that can get dental floss into tight places, and flosses with one stiff end you can guide under the wire so you can direct the floss to where it’s needed. There are even tiny cone-shaped brushes called “interproximal brushes” that can fit under your wires to clean around your brackets and teeth.

Take a care kit to school or work with you so you can keep the tooth surface under your wires and around your brackets free of plaque. After all the hard work you’ve put in with your braces, the last thing you want is cavities once you’ve achieved your beautiful smile!

• Down to the Wire

We said archwires were awesome, but we didn’t say they were perfect! We couldn’t leave without suggestions for handling any wire-related problems that might come up.

One of the most common problems is the irritation caused by the end of a wire that has somehow come loose. You might be able to use a cotton swab to gently push the wire flat against the tooth. If that doesn’t work, orthodontic wax can be used to cover the end of the problem wire and smoothed into place. We’ll provide you with instructions on how to handle these and other minor wire problems at home. 

Other problems should be run past us first. If you feel your wire is coming loose, or if a loose end is causing a lot of pain and irritation, call our Charlotte, NC or Spartanburg, SC office. We’ll give you instructions on how to help, and make an appointment if necessary for a professional fix.

In fact, call us anytime you have questions about your braces. We’re here to help you understand each phase of the orthodontic process as you move step by step on the path to a healthy bite and a beautiful smile. And what’s more awesome than that?

The words “overbite” and “overjet” certainly sound similar. Both conditions concern your front teeth. Both conditions fall under the same category of bite problems—Class II malocclusions, if you want to be technical. So it’s not surprising that they’re often used interchangeably. But while there are similarities, overbite and overjet are also distinctly different.

• Overbite/Overjet Geometry

In a healthy bite, the front top teeth project slightly beyond, and slightly overlap, the bottom teeth. The key word here is “slightly.” With a Class II malocclusion, the upper front teeth project further beyond the lower teeth than they should.

Of course, teeth and bites are as individual as we are, so there are variations in just how and just how much the overlap occurs. In diagnosing an overbite vs. an overjet, the difference comes down to a matter of vertical vs. horizontal.

An overbite, or deep bite, occurs when the top teeth vertically overlap the bottom teeth more than they should for a healthy bite. Generally, when a person’s top teeth cover more than a quarter of the bottom teeth when biting down, or more than two to three millimeters, that person is said to have an overbite.

An overjet, commonly known as protruding or buck teeth, is the result of a horizontal overlap that is broader than normal. This causes the top teeth to project outward toward the lips more than they do in a typical bite. An overjet is usually diagnosed when the horizontal distance between the top and bottom teeth exceeds two to three millimeters.

• Overbite/Overjet Causes

The causes for both an overbite and an overjet might be dental (caused by tooth alignment), or skeletal (caused by bone development), or a combination of both. These bite problems can run in families. They are also affected by the size and position of the jaws and the shape and position of the teeth.

Early oral habits, such as prolonged and vigorous thumb-sucking or pacifier use, can also contribute to the development of a Class II malocclusion, particularly an overjet. Consistent pressure from thump or pacifier pushes the teeth outward as they erupt, which encourages them to protrude. These oral habits can affect the shape of the palate and jaw, too.

• Overbite/Overjet Treatments

There are many types of treatment available to correct teeth and bite misalignments. Cooper, Ford S. will tailor your treatment to your specific malocclusion for the best orthodontic outcome.

If you have a mild malocclusion, and minor dental issues are the main cause of that malocclusion, either braces or clear aligners can be effective for an overjet or an overbite. Elastics (rubber bands) are often used as part of this treatment.

If the malocclusion is due to bite problems caused by uneven upper and lower jaw development, devices called functional appliances can be used with braces to help guide the growth of the jawbones while young patients’ bones are still forming. These include appliances that work inside the mouth to help the upper and lower jaws grow proportionally, and external appliances such as headgear.

In some cases, where the malocclusion is skeletal in nature as well as dental, surgical treatment might be necessary to reshape the jawbone itself. Orthodontic treatment is usually needed as well both before and after surgery.

• Overbite/Overjet Consequences

Over time, a deep overbite can cause damaged gum tissue, worn enamel, and fractured teeth. When teeth protrude because of an overjet, they can lead to self-consciousness and are more at risk for injury. Both malocclusions share dental and medical consequences, including concerns about facial and jaw appearance, problems speaking or chewing, headaches, and face and jaw pain.

Class II malocclusions aren’t all the same, and orthodontic patients aren’t all the same either. You may have a minor malocclusion or a significant one. You may have an overbite, or an overjet, or a combination of different bite and alignment concerns. Your malocclusion may not bother you at all, or it may cause pain, discomfort, or self-consciousness.

That’s why every overbite or overjet should be evaluated by an orthodontist. When you visit our Charlotte, NC or Spartanburg, SC orthodontic office, Cooper, Ford S. will be able to diagnose the exact nature of your malocclusion, the reason for it, and your best individualized treatment plan. An overbite and an overjet are different malocclusions, but you and your orthodontist want the same outcome for each: a healthy, attractive, and confident smile!